LoudMouth Aids in Warm Floor Installation

Are you looking to install your own radiant floor heating system? With our Loud Mouth monitor, you will be well on your way to warmer floors. This monitoring device ensures your in floor radiant heated floor system is installed correctly. Radiant floor heating installation has never been easier, and with the ability to monitor up to three mats simultaneously, you can rest assured lead wires have not come loose from terminals and damage has not occurred to the heating product when installing the radiant floor heating.

Ensure A Quality Installation with the NEW LoudMouth.
Monitor upto 3 mats simultaneously!

 

LoudMouth Operating Instructions:

Makes Installing Radiant Floor Heating Simple

  1. Insert each lead wire from the heating product into L1 and L2 terminals (no polarity) with the ground wire inserted into the G terminal. Tighten the terminal screws onto the wires.
  2. Set switch to ON position.
  3. Green light indicates the LoudMouth is operating.
  4. The red light and alarm indicate lead wires have come loose from terminals or damage has occurred to the heating product.
  5. Press the TEST button to simulate a damage condition before beginning work.
LoudMouth Instructions 		 




Privacy Statement

© 2006 Watts Radiant® All rights reserved.